3.5 inch LCD display modules
We currently produce 5 display modules at 3.5", in IPS, TN - 5 with a touch option, 0 without. Available interfaces: 8BIT, RGB, RGB 24BIT, RGB/MCU, UART/RS485/CAN3. Sample MOQ 5 pcs, production lead time 10-20 days.
Published at this size: 3.5 inch TFT LCD Display Modules (3), 3.5 inch Smart Serial UART LCD Module (1) and 3.5 inch LCD Touch Screen Module (1). Every one of them is made on our own line and can be modified — FPC, backlight, touch and cover glass are open on all of them.
3.5" models without touch
Every published model at this size lists a touch option - see below.
3.5" models with touch
3.5 Inch Industrial Color IPS LCD Screen 240×320 LCD Color Display With Wide Viewing Angle
JM-PT075
350cd/m2 IPS LCD Display 3.5 Inch Wide 80° Viewing Angle With RGB 24 Bit Interface
JM-PT113
3.5 Inch IPS Display Industrial Serial Port LCD Display Touchscreen LCD Monitor 450cd/m2
JM-LH011-TI320240NUL035
320x480 Pixels TFT LCD Display Panel 3.5 Inch LCD Display Module
JM-PT048-01
3.5 Inch TFT LCD Display Touch Screen , High Resolution TFT Display 320×480 Pixels OEM ODM
JM-PT048-02All 3.5" models compared
| Model | Size | Resolution | Type | Interface | Brightness | Touch | Operating temp |
|---|---|---|---|---|---|---|---|
| JM-PT075 | 3.5" | 240×320 | IPS | 8BIT | 300 cd/m² | No Touch Screen Or Touch Screen For Optional | -20°C to +70°C |
| JM-PT113 | 3.5" | 320×240 | IPS | RGB 24BIT | 350 cd/m² | Selectable | -20°C to +70°C |
| JM-LH011-TI320240NUL035 | 3.5" | 320×240 | IPS | UART/RS485/CAN3 | 450 cd/m² | No Touch Screen Or Touch Screen For Optional | -20°C to +70°C |
| JM-PT048-01 | 3.5" | 320×480 | TN | RGB/MCU | 250 cd/m² | No Touch Screen Or Touch Screen Optional | -20°C to +70°C |
| JM-PT048-02 | 3.5" | 320×480 | TN | RGB | 250 cd/m² | selectable | -20°C to +70°C |
Values are typical at 25 °C. Datasheets and 2D drawings are sent on request - email hyd@szjunxian.com with the model number.
Choosing between these 3.5" modules
Start from the interface
Your host processor decides this more than the panel does. An MCU without an LCD controller needs SPI or a smart module; an ARM board with a display controller can drive RGB; MIPI needs a DSI-capable SoC.
Then the glass mode
IPS keeps colour stable when the panel is read from an angle. TN costs less and is fine when the operator faces the screen. VA gives the deepest black.
Then brightness
Indoors 200-300 cd/m² is enough. Near windows or in workshops go to 350-450. Outdoors and in vehicles, 500 cd/m² and above.
Finally mechanics
Outline dimension, active area, FPC exit direction and connector type decide whether the module drops into your enclosure. All four are listed on each model page, and all four can be changed.
If two models look equivalent, the difference is usually the driver IC or the FPC layout. Send us your board and we will say which one integrates with fewer changes.
3.5 inch modules - questions
How many 3.5 inch display models do you make?
5 3.5" models are in current production and listed on this page, covering 240×320, 320×240, 320×480. More variants exist that are not listed - ask if you need a specific combination.
Can you customise a 3.5 inch module?
Yes: FPC length and pin order, connector, backlight brightness, touch panel and cover glass. Custom MOQ is 1,000 pcs; catalogue models start at 100 pcs.
What is the lead time?
10-20 days for production, 10-15 days for samples.
What types of 3.5 inch display module do you make?
At this size we publish 3.5 inch TFT LCD Display Modules (3), 3.5 inch Smart Serial UART LCD Module (1), 3.5 inch LCD Touch Screen Module (1). Each links to its own family page with the full range of sizes.
Need a quote or a datasheet?
Send us size, resolution, interface and annual quantity. Our engineers reply within one working day. Sample MOQ 5 pcs, lead time 10-20 days.