2.8 inch LCD display modules
We currently produce 4 display modules at 2.8", in IPS, TN - 4 with a touch option, 0 without. Available interfaces: 8-bit MCU, Emulator, RGB 24BIT, Serial Port. Sample MOQ 5 pcs, production lead time 10-20 days.
Published at this size: 2.8 inch TFT LCD Display Modules (2), 2.8 inch Smart Serial UART LCD Module (1) and 2.8 inch LCD Touch Screen Module (1). Every one of them is made on our own line and can be modified — FPC, backlight, touch and cover glass are open on all of them.
2.8" models without touch
Every published model at this size lists a touch option - see below.
2.8" models with touch
2.8 Inch BMS Serial Port LCD Display IPS TFT Panel 800x480 Wide Viewing Angles
JM-LH017-00
Industrial 2.8 Inch TFT LCD Display 240x320 For Harsh Environments
JM-PT119-01
2.8 Inch Capacitive Touch Screen TFT Display 240x320 330nits Brightness
JM-PT033-01
2.8 Inch Industrial TFT Custom LCD Display Panel Four Channel Audio Display Panel
JM-T006All 2.8" models compared
| Model | Size | Resolution | Type | Interface | Brightness | Touch | Operating temp |
|---|---|---|---|---|---|---|---|
| JM-LH017-00 | 2.8" | 240×320 | TN | Serial Port | 200 cd/m² | With Touch (selectable) | -20°C to +70°C |
| JM-PT119-01 | 2.8" | 240×320 | IPS | 8-bit MCU | 600 cd/m² | Touch-screen And No Touch Screen For Optional | -20°C to +70°C |
| JM-PT033-01 | 2.8" | 240×320 | TN | Emulator | 280 cd/m² | Touch-screen And No Touch Screen For Optional | -20°C to +70°C |
| JM-T006 | 2.8" | 320×240 | IPS | RGB 24BIT | 350 cd/m² | selectable | -20°C to +70°C |
Values are typical at 25 °C. Datasheets and 2D drawings are sent on request - email hyd@szjunxian.com with the model number.
Choosing between these 2.8" modules
Start from the interface
Your host processor decides this more than the panel does. An MCU without an LCD controller needs SPI or a smart module; an ARM board with a display controller can drive RGB; MIPI needs a DSI-capable SoC.
Then the glass mode
IPS keeps colour stable when the panel is read from an angle. TN costs less and is fine when the operator faces the screen. VA gives the deepest black.
Then brightness
Indoors 200-300 cd/m² is enough. Near windows or in workshops go to 350-450. Outdoors and in vehicles, 500 cd/m² and above.
Finally mechanics
Outline dimension, active area, FPC exit direction and connector type decide whether the module drops into your enclosure. All four are listed on each model page, and all four can be changed.
If two models look equivalent, the difference is usually the driver IC or the FPC layout. Send us your board and we will say which one integrates with fewer changes.
2.8 inch modules - questions
How many 2.8 inch display models do you make?
4 2.8" models are in current production and listed on this page, covering 240×320, 320×240. More variants exist that are not listed - ask if you need a specific combination.
Can you customise a 2.8 inch module?
Yes: FPC length and pin order, connector, backlight brightness, touch panel and cover glass. Custom MOQ is 1,000 pcs; catalogue models start at 100 pcs.
What is the lead time?
10-20 days for production, 10-15 days for samples.
What types of 2.8 inch display module do you make?
At this size we publish 2.8 inch TFT LCD Display Modules (2), 2.8 inch Smart Serial UART LCD Module (1), 2.8 inch LCD Touch Screen Module (1). Each links to its own family page with the full range of sizes.
Need a quote or a datasheet?
Send us size, resolution, interface and annual quantity. Our engineers reply within one working day. Sample MOQ 5 pcs, lead time 10-20 days.